New toilet won't flush?!? - kohler toilet problem pictures
Hello,
I had the same problem about 2 months with my last bath. Filler fine, well-reservoir drainage basin, working hard, and suddenly no longer working well. After the solution of the great I called a plumber, and he said by telephone that was necessary to replace the toilet.
I replaced the toilet with a Kohler Cimarron. It worked immediately after installing. He said it was not a problem in other places and the bathroom was a sudden illness, though the old man worked perfectly when tested in the bathtub.
Anyway. Now I'm in the same boat. The new toilet is never blocked / clogged as the first. Seemingly without reason, that the law is not another download. I fell and hurt many times and there are not many differences. If I pullthe flight of deposits into the bowl a little slower than I think it should fill the cup ... Bowl slowly drains a little higher than normal and does not detract from the cup.
No idea what could be my problem? For each flight, the other works well in the house. The vent in the ceiling is free and clear.
One thing I'm not sure that there is a large amount of water that drains at a time when the kitchen sink, or run the dishwasher or washing machine, because the bathroom gurgle.
In other words, please help. I do not want to go hunting, a second bathroom.
Thank you,
RJ
5 comments:
Check the drip pans from his house to the sewer connection to the city. It could be clogged causing a slow leak in the toilet. Other fixtures could run because the volume of water in a toilet a color used.
Check the drip pans from his house to the sewer connection to the city. It could be clogged causing a slow leak in the toilet. Other fixtures could run because the volume of water in a toilet a color used.
It seems that the pipe air, a kind of restriction in one place or the main drain is an obstacle when others clinging to the flight in May that a shower at night or at other large volumes of water if you use this problem leads to the main reason is blocked a bit of luck anyway.
The bathroom is not a siphon estabishing emptied. Let's say you have not broken a bath when the toilet drain is clear, and provided you have installed correctly, I suspect the slow pace of filling that you mention is not fast enough to create a siphon. Check the ball valve is working properly. It should be completely open and suddenly, when you pull the lever color, so that a trickle of water into the bowl. Less likely is that the wax ring can break and to get air into the waste stream. The pact toilets and children do not have much downstream of a ridge, and partly dependent on the sewer line to create the trap.
Not sure if this is your problem or not, but at high altitude at which the work does not receive water from the reservoir to the toilet fast enough. After he was changed a number of toilets found that the gastric tube has folded between the small and the float valve in the pipe flow has been. The proof is easy to fill half a bucket of 5 gallons-way and dump in the toilet, so that it takes water in a good color, it is their problem. If not, the problem is download the shell (main connected, roots, etc.)
Post a Comment